VULCAN-2-ASB - Addressable BLACK Base Sounder Beacon

Not rated yet
0

The addressable VULCAN 2 A is available as an Addressable Sounder/ Beacon which may be field configured to
operate in either SHADOW or AUXILIARY modes. There are also versions available incorporating a loop isolator. Up
to 64 VULCAN 2 A Sounder/ Beacon devices can be connected to a single Loop depending on Loop Loading. All
VULCAN 2 A devices have dip-switch Address setting while Tone and Mode selection is via a jumper. There is also a
potentiometer which may be used to adjust the sound level if required. Normally the VULCAN 2 A will be used in
conjunction with a detector however a lid is available as an option for the VULCAN 2 A.

Lid sold separately.

Price shown is standard list price.  If you are a credit account customer, please log in to see your agreed price.

Please or to buy this product.

The addressable VULCAN 2 A is available as an Addressable Sounder/ Beacon which may be field configured to
operate in either SHADOW or AUXILIARY modes. There are also versions available incorporating a loop isolator. Up
to 64 VULCAN 2 A Sounder/ Beacon devices can be connected to a single Loop depending on Loop Loading. All
VULCAN 2 A devices have dip-switch Address setting while Tone and Mode selection is via a jumper. There is also a
potentiometer which may be used to adjust the sound level if required. Normally the VULCAN 2 A will be used in
conjunction with a detector however a lid is available as an option for the VULCAN 2 A.

Shadow Sounder/ Beacon: A Shadow Sounder/ Beacon does not have an individual address thus freeing up
addresses for more detection devices. Shadow Sounder/ Beacons do not report back to the control panel so their
presence on the Loop is not monitored.

Auxiliary Sounder/ Beacon: When the VULCAN 2 A is configured as an Auxiliary device, it shares the same address as
the detector with which it is co-located. When operating in this mode the VULCAN 2 A monitors the Address loop for
the command from the control Panel to the detector to illuminate its LED. When this command is received the
VULCAN 2 A is also activated. If a Fire is confirmed the remaining sounders may be activated using the Evacuate
command. This reduces the inconvenience to other guests in the event of a false alarm while at the same time giving
early warning to the occupant of the room in the case of an actual Fire event. Pressing Sounder silence at the panel
silences all active sounders. The maximum number of Auxiliary Sounder/ Beacons is 63 and they can be allocated
between address 1 and 63.

Please log in to see the product manuals